Battery / Fuel Cell / Electric Powertrains
DC source/sink
Single-Channel System
I-TS-3842: Overload-capable single-channel system
The I-TS-3842 is a single-channel DC source/sink that can be supplemented with select options. The I-TS-3842 achieves a measurement accuracy of 0.03% fs for voltage and 0.05% fs for current as standard. For configurations rated at ≥ 1000 V DC, a voltage rise time of 250 V/ms is also achieved.

Our high-performance test system I-TS (Infeed test system) is a high dynamic, bidirectional DC power supply with continuous and seamless transition from source to sink operation. The outstanding performance is the basis for a wide range of applications in the automotive, hydrogen and laboratory sectors.
Standard features
- Input voltage (standard): 3x 400 V, 50 / 60 Hz
- Main switch (load-break switch with fuses in the AC input; can be locked in the off position)
- Safety control for performance level d (PLd) in accordance with ISO 13849-1 / EN 60204-1
- Display with touch operation
- "Battery Tester" Model
- ≥ 1000 V / voltage rise time of 250 V / ms
- Capable of withstanding overload for 30 seconds every 10 minutes.
- Analog voltmeter in the cabinet door
- DC Output Contactors (Standard Contactors)
- DC current measurement with 0.05% fs accuracy
- Terminals for DC voltage measurement (accuracy: 0.03% fs with sense leads)
- Connection terminals for external „emergency stop“
- Connection terminals for external „stop“
- Terminal blocks for calibration kits
- Modbus TCP/IP Interface
- CAN Bus Interface ("100 Hz" with dbc file)
- VNC Interface via Ethernet
- Protection class IP 20, or IP 54
- Low-noise design (vibrating metal parts, fan control)
- Rittal Type VX Enclosure
Options
- (M)I-TS-ISO-3.0, DC Insulation Monitoring Device
- I-TS-Parallel 3.0, Parallel Control Unit
- (M)I-TS-E-Stop, emergency stop button (yellow/red) installed in the cabinet door
- (M)I-TS-IF-ANALOG-IN, “Analog Input” Interface
- (M)I-TS-IF-ANALOG-OUT, “Analog Output” Interface
- (M)I-TS-TEST-EM, switchable to “Battery Tester / Battery Simulator” mode
- (M)I-TS-EM, “Battery Simulator” operating mode
- (M)I-TS-IF-EtherCAT
- (M)I-TS-IF-PROFIBUS
- (M)I-TS-IF-PROFINET
We would be happy to review your
I-TS-3842 as a PDF
Overview of the different models as PDF
Learn more!
You want to know more about our products? We will be happy to send you more information by e-mail!